Jan Panteltje wrote:
So we ask him again: What values did you enter, and what dielectric constant
for the PCB material and 'tape'.
You are getting to be a real pain in the keyster... LOL
I use 0.062" 1oz FR4 for my designs.
The dielectric constant of FR4 is about 4.6
Thickness of 1oz copper is about 0.0014"
So with a ground plane on one side of the board... the width of the
trace to maintain a 50 Ohm characteristic impedance is about 0.113"
wide.
P.S. Have no idea what tape you're talking about...
www.telstar-electronics.com