View Single Post
  #21   Report Post  
Old September 30th 06, 08:52 PM posted to sci.electronics.design,sci.electronics.components,rec.radio.amateur.boatanchors,sci.electronics.repair
Jonathan Kirwan Jonathan Kirwan is offline
external usenet poster
 
First recorded activity by RadioBanter: Sep 2006
Posts: 3
Default FA: 1lb PLUS OF VARIOUS NEW TRANSISTORS SOME JANSO MANY:-)

On Sat, 30 Sep 2006 14:11:42 -0400, "Spamfree"
wrote:

snip
They were packed well and proven as such. When we went to the
UPS office, the business was transacted and they were told it was
"glass"........ The UPS lady picked the box up and gave it a heave ho to a
pile. My "ex" mother in law was ****ed. BUT, the package "did" survive the
journey.
snip


I once packed a box containing a monitor and keyboard to be shipped
ahead of me (I was flying) via UPS to a destination cross-country. I
had packed it using shaped foam that was at least 8 inches thick on
all sides and bottom and there was almost no possibility of inner
movement of either the monitor or keyboard. When I picked up the box
there was a nice hole with some 5" diameter dead-center on one of the
faces. On opening the box I found the keyboard had been demolished
but the monitor survived.

On closer look, it had the rough appearance of a sharp, conical
penetration. It was definitely NOT blunt damage. I then began to
imagine the idea that UPS keeps a steel cone mounted on their cement
factory floors, just for the occasional frustrated WHACK their
employees sometimes need to do to a box.

I really couldn't have anticipated this kind of penetration. It was
sharp, narrow, deep, and had enough of an impact to press through a
lot of foam and to then still break through the keyboard.

Jon