Guy needs to chime in on this one.........I think the flex only does
that good on IP3 if used with the "approved" sound card ????

No big deal as I don't think that sound card is very expensive.

Those are REALLY good spec's for 1.8 mhz & above

I have heard several amateur radio op's using the SDR-1000 & they seem
to like them. Not sure if it is due to the receiver or the "HIFI" wide
band width SSB transmit. I know those op's running that bassy audio
think they sound good & do when they are 20 over but try to understand
what they are saying when they are in a pileup or just a little above
the noise level.

I for one just do not like using a receiver from a computer interface.
I have tried about all of the programs with several receivers & it
just takes the thrill factor of tuning a radio out for me. Many do like
software control & if you do.... have at it.

73, Ken KG4BIG

Seeing-I-dawg wrote:
SDR-1000

http://www.flex-radio.com/About.aspx

LSB, USB, AM, FMN, Sync AM, CW, and DRM are supported.

Receive 12KHz-60MHz
(Requires external user supplied pre selector for best operation below 160M)
see:
http://sdr-1000.blogspot.com/2006/09...w1vlf-low.html
http://sdr-1000.blogspot.com/2006/10...osure-for.html

"This radio currently features receiver specs that out perform all three of
the top "mega-priced" radios by Ten-Tec, Icom, and Yaseu."

"3rd and 4th order harmonics are so much better than any other radio
currently on the market."
l+30 dBm IP3"
"98 dB IMD DR3 @ 2 KHz"

http://www.eham.net/reviews/detail/4108

Full Manufacturer Specifications He
http://www.flex-radio.com/Products.aspx?topic=sdr1k


"dxAce" wrote in message
...


D Peter Maus wrote:

dxAce wrote:
Universal Radio now has the NRD-630 up on their site:

http://www.universal-radio.com/catal...vr/nrd630.html

dxAce
Michigan
USA

Drake R7, R8, R8A and R8B


You gotta wonder, with the accelerating vacation of HF by
broadcasters, the stagnation in the development of DRM, the ongoing war
on the radio hobby by HOA's and local government, and the gathering
threat of BPL making some spectra difficult if not impossible to use,
just who is this rig targeting?

And for the kind of money asked for premium rigs by Ten-Tec, ICOM, AOR
and now JRC, what do they know that we don't? What's coming?

Good question. I'm waiting to see the new offering by Kneisner + Doering.

dxAce
Michigan
USA

Drake R7, R8, R8A and R8B