Anderson Powerpoles on Front Panel
Can you cut a rectangular hole in the panel, slip the Powerpole
connector through (far enough so you can connect its mating plug) and
use a glob of epoxy on the back side to hold the plug to the backside of
the panel?
Scott
N0EDV
Al Lorona wrote:
Hi, Everybody,
I am interested to hear how you have solved the problem of panel-mounting
Anderson Powerpole connectors.
I have already ruled out the Anderson 4-pole "Powerpole Pak" connectors. Too
bulky. Don't need four. Just need two. I know about these. I am interested
in other solutions.
Thanks very much.
Regards,
Al W6LX
|