Thread: Crystal Frequencies, HR-2A
View Single Post
  #3   Report Post  
Old February 27th 04, 05:21 AM
KU2S
 
Posts: n/a
Default
On 27 Feb 2004 02:56:03 GMT, (Fred McKenzie) wrote:

Have a Regency HR-2A that I want to re-crystal for packet
use

Raymond-

Receive crystals are in the 45 MHz range, series resonant minus a few Hz, (Fr -
10.7)/3. There is no adjustment, so you must replace the crystal if it is too
far off frequency. The stock IF filter is fairly broad.

Transmit crystals are in the 6 MHz range, parallel resonant, about 20 pf, there
is a trimmer capacitor.

One of the guys around here put one on packet and claimed good results.

73, Fred, K4DII


Thanks folks! I might actually have the info I needed, thanks to you
guys. I printed it out, just to make sure I don't **** off MIchael
again... Hopefully I can return the favor some time!


Raymond Sirois KU2S
SysOp: The Lost Chord BBS
607-733-5745
telnet://thelostchord.dns2go.com:6000
Reply With QuoteReply With Quote