On Mon, 8 Mar 2004 17:28:33 -0500, "CL"
wrote:
If that is the one with the High Impedance setting, try that! The direct
setting may not work right. CL
Tried 'em both. No help.
Also, I measured the voltage at the subject pin with a Fluke RF
voltage probe: 7 millivolts. That is probably 1/100 of what the
meter needs on the TTL setting.
This is starting to look like an oscilloscope job. To bad I just
returned one I had borrowed [for six months].
Ken KC2JDY
Ken
(to reply via email
remove "zz" from address)
|