View Single Post
  #6   Report Post  
Old December 27th 06, 10:45 PM posted to rec.radio.amateur.antenna
Roy Lewallen Roy Lewallen is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,374
Default Attention Out-of-the-Box Thinkers...

Wow, it's taken Rockwell nearly forty years to discover this technology.
This is obviously only a minor modification of the Turbo-Encabulator,
described in detail as early as 1967. I noticed that many of exactly the
same basic principles are used in the "new" device. Here's where I first
heard of this technology:

From Q POINT, the 9th Aerospace Defense Division newsletter, March 1967

Something for the Technically-Minded

(Our more technically-minded readers have occasionally criticized Q
POINT for carrying what they consider less than significant articles.
Because of this criticism, we offer the following article on the
development of the Turbo-Encabulator. Frankly, it is a little deep for
us, but we hope you find it something of value. - Ed.)

For a number of years now, work has been proceeding in order to bring
perfection to the crudely conceived idea of a machine that would not
only supply inverse reactive current for use in unilateral phase
detractors, but would also be capable of automatically synchronizing
cardinal grammeters.

Such a machine is the "Turbo-Encabulator".

Basically, the only new principle involved is that instead of power
being generated by the relative motion of conductors and fluxes, it is
produced by the modial interaction of magnetoreluctance and capacitive
directance.

The original machine had a base-plate of prefabulated amulite,
surmounted by a malleable logarithic casing in such a way that the two
spurving bearings were in a direct line with the pentametric fan. The
latter consisted simply of six hydrocoptic marzelvanes, so fitted to the
ambifacient lunar waneshaft that side fumbling was effectively
prevented. The main winding was of the normal lotus-o-delta type placed
in panendermic semi-boloid slots in the stator, every seventh conductor
being connected by a non-reversible tremie pipe to the differential
girdle-spring on the up end of the granmeters.

Forty-one manestically spaced grouting brushes were arranged to feed
into the rotor slip-stream a mixture of high s-value
phenylhydrobenzamine and five percent reminative tetraliodonexamine.
Both of these liquids have specific pericosities given by P-2.5c. n 6.7
where "n" is the diathetical evolute of retrograde temperature phase
disposition and "c" is Cholmondeley's annular grillage coefficient.
Initially, "n" was measured with the aid of a metapolar refractive
pilfrometer (for a description of the ingenious instrument, see "L. E.
Elektrotechnistratischs-Donnerblitze," Vol III), but up to the present
date nothing has been found to equal the trancendental hopper dadoscope.
(See "Proceedings of the Peruvian Academy of Skatalogical Sciences,"
June 1914.)

Electrical engineers will appreciate the difficulty of nubbing together
a regurgitative purwell and a suporamitive wennelsprocket. Indeed, this
proved to be a stumbling block to further development until, in 1942,
it was found that the use of anhydrous nagling pins enabled a
kryptonastic bolling shim to be tandered.

Undoubtedly, the turbo-encabulator has now reached a very high level of
technical development. It has been successfully used for operating
nofer trunnions. In addition, whenever a barescent skor motion is
required, it may be employed in conjunction with a drawn reciprocating
dingle arm to reduce sinusoidal depleneration.

Roy Lewallen, W7EL