"bronco" wrote in message
...

"Telstar Electronics" wrote in message
oups.com...
Please give me your ideas for a name for this developing product...



Any technical specifications? What gain does it have at 3KHz compared to
other frequencies and what range does it cover. Also what is the attack
and decay and gain on 3KHz?
I am interested to know if it would be any better than the processors I
have used before. Many such as Turner and Protel are way over the top and
when matched to a badly tuned CB they sound bad! They are completely
unsuitable for FM use but will work to some extent on AM, but are far
better on SSB. CBers need to get away from thinking the louder the
microphone the more power. You will hear many using a compressor on FM
that is causing so much splatter. People still turn the deviation on
radios up in error.


One of the bad things about compressors and clippers is that usually the
person using it does not have proper test equipment to set it up. Most try
to set it for max "swing". Most people to not understand that power generae
outside of the passband of a receiver is a total waste. Well maybe not
totally, at least your buds 10 channels away will know you are on the air.