Thread: 0.125" and 0.156" pins for 7-pin tubes.
View Single Post
  #5   Report Post  
Old January 30th 07, 10:55 PM posted to rec.radio.amateur.boatanchors,rec.antiques.radio+phono
Steven Swift Steven Swift is offline
external usenet poster
  
First recorded activity by RadioBanter: Aug 2006
Posts: 46
Default 0.125" and 0.156" pins for 7-pin tubes.
(Scott Dorsey) writes:

Look at the crimp pins used on the Amphenol Series 96 connectors and
see if you can't make some of those work. There are a wide variety
of sizes and they are very reliable. They get used for all kinds of
things.

If that doesn't do it, try the Concord catalogue. I think I saw some
machined pin sockets in there. I don't think Mill-Max makes anything
big enough.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Thanks, I will take a look.

Steve.
--
Steven D. Swift, , http://www.novatech-instr.com
NOVATECH INSTRUMENTS, INC. P.O. Box 55997
206.301.8986, fax 206.363.4367 Seattle, Washington 98155 USA

Reply With QuoteReply With Quote