On Feb 5, 6:52 pm, K3HVG wrote:
Randy, I have 40 or so Hammarlund transformer/inductors removed from
cannibalized HQ-170/170A's (and maybe a HQ 100 or110). If you can pass
on the actual p/n, printed on the side of the cans in question, perhaps
I can help. There should be two sequence numbers on each can. de K3HVG



wb5kcm wrote:
Anyone know if the T13, 1.05 to 2.05 Mcs antenna transformer in the
HQ-180 could be used for T12, 160 meter antenna transformer in the
HQ-170 ??
Also, What about using one of the 60 Kcs IF transformer for the T28
BFO coil? Possibly use one winding as the 60 Kcs BFO oscillator coil?
Anyone have any ideas or possibly tried this ??
Any info or opinions are most welcome and appreciated.
Randy, wb5kcm- Hide quoted text -

- Show quoted text -

Jeep, Thanks for your offer. Actually, I have located a local Ham here
in my area that has an HQ-170 parts receiver. I am driving out to his
QTH this coming Saturday and see if he has the parts. If I can use you
for a backup on this, it will be most appreciated. What I am looking
for are these items.

1. T12, 160 meter antenna transformer, p/n K38926-1
2. T28, 60 Khz BFO oscillator coil, p/n M42005-4

The T12 in my receiver does not have a p/n on the can, the other IF
cans, etc. do have the p/n. The T28 is completly missing from my
receiver. These p/n's that I have are from the HQ-170 book that I
printed out from the Bama site. Thanks and I will let you know how my
visit goes Saturday. 73 de Randy, WB5KCM