View Single Post
  #13   Report Post  
Old February 21st 07, 09:47 PM posted to rec.antiques.radio+phono,rec.radio.amateur.boatanchors,rec.radio.amateur.homebrew
Chuck Harris Chuck Harris is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 270
Default Hammarlund HX-50 choke question.

Scott Dorsey wrote:
Chuck Harris wrote:
A swinging choke aids in the *voltage* regulation of a choke input
power supply by having a high inductive reactance at low currents (where the
supply would tend to be too high in voltage), and having low inductive
reactance at high currents (where the supply would normally tend to droop.)

Is that what you are thinking of?


Ahh! So the increased current causes the inductive reactance to drop,
causing the series impedance to drop. That makes sense, so long as the
source impedance is the same all the time, right?
--scott


If the source impedance changed, it could either help, or hurt the process.
It would all depend on how it changed. But I would expect that for the
usual diode, and transformer combination, the source impedance should be
pretty stable.

For a swinging choke to work, the power supply must be choke input. It
is necessary that the choke see the massive AC ripple that comes out of
the rectifier. No ripple, no regulating effect from the reactance.

-Chuck