? on neon light as static discharge device
"Dave" wrote in message
...
I saw somewhere that you could use an NE-2 bulb between the antenna "hot"
lead and ground as a static discharge device for a receiver, but can't find
an NE-2 and don't know anything about neon bulbs. Anybody know if a
standard neon bulb rated at 125 VAC could be used in this manner? Or how I
could test it? I'm thinking about charging up a 50V electrolytic capacitor
and hitting the bulb with that, to see if it discharges the cap. I have a
.22uF 630V mylar cap between the antenna and the input to the tuner because
the 35V disc I had there got blown, so I know that static can be a problem
with my setup even though it is grounded at two points.
Would welcome any ideas anyone has on how to make this work...
Thanks,
Dave
A resistor will do as good, a high value of resistance relative to he
impedance of the receiver. I use 100K. The neon bulb can be fun though. I
used to have one attached to a long wire(200 Ft) or so and it was fun
watching it flash during storms.
Jimmie
|