View Single Post
  #11   Report Post  
Old April 4th 07, 09:46 PM posted to rec.antiques.radio+phono,rec.audio.tubes,rec.radio.amateur.homebrew,sci.electronics.components
Uncle Peter Uncle Peter is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 189
Default 811A's, Dual Grid and Class B triodes


"RapidRonnie" wrote in message
ups.com...
On Apr 2, 8:53 am, "Ed Engelken" wrote:
Googling the term, I see that the 52 tube seems to be an example where
both grids are brought out to individual terminals.


=======================================
The #46 is another. The 46 was popular in a number of A****er Kent
radios circa 1932-33. Class B Push-Pull output stages in high-end
radios had a brief run in the early 1930s, then faded into history. --
Ed


Because using conventional circuits the distortion was terrible. True
Class B operation works well only at high continuous levels without
extreme measures such as Wiggins and Mcintosh/Gow/Corderman afforded.
Al Bereskin at Baldwin designed the "poor man's Mc" for organ use and
it was published in an extremely good DIY article in the IRE journal
in '55 or '56. It never got below 2% THD.


Most of those sets used push-pull class A, not B.

Pete