On 26 Apr 2007 17:10:00 -0700, Telstar Electronics
wrote:

+++On Apr 26, 6:58 pm, Vinnie S. wrote:
+++ Are you ****ing kidding? Damn, I don't even have anything against you, but even
+++ that is a really lame excuse.
+++
+++
+++The components were very expensive for that amplifier... we used
+++nothing but premium electrical and chassis components... to say
+++nothing of the finest grade FR4 pc board material. That stuff doesn't
+++come cheap! That amplifier was also very labor intensive to build.
+++Just wasn't worth all the trouble to offer a unit of that high
+++quality.
+++
+++
+++http://www.telstar-electronics.com/d...cialOffers.htm
+++
***************

Even in small quantities, 10 boards, you can get a PCB of 40 square
inches in the $16 per board range. That is 2 layer FR4 0.062 thick.
That includes silkscreen and solder mask. That is with 5 day delivery.
10 day delivery will be about $2 per board less. IF you do about 5000
boars you should be around $6 per board. You can have a Chinese house
do it for about $4 per board in 5K quantity .

james