Larry Benko wrote:
Roy Lewallen wrote:


Yep, that's perfectly adequate to distinguish the types. You must have
made the measurements at a pretty low frequency. Type 75 has a Q of 1
at about a MHz, and 43 at a few MHz, and they drop at higher
frequencies. Will the circuit oscillate with Q that low?

Roy Lewallen, W7EL


Referring to http://www.aade.com/lcm2binst/HP.html the measurement freq.
was about 750KHz for the type 61 and 43 materials and about 70KHz for
the 75 material based on the inductances that were displayed.

73, Larry W0QE

Darn typo. That should be 750KHz for the type 61 and 43 and 700KHz for
the type 75. Sorry.

73,Larry W0QE