"Jim - NN7K" wrote in message
t...
Try this (with Eznec 5)

Step 1 Open (or write) your file.
Step 2 Do farfield plot , then save
this file as (Tracefile (.pdf,pdf3)
You need to name this file!.

Step 3 Do the SAME steps for Antenna #2 (and 3,4,5, ect) be sure to use
diff names!

Now, Step 4,go to (view, traceview), and this

will give a warning.Run , under the "traceview window, the FIRST FILE you
named.

Step 5 Now , click on "Add trace". insert the name of
the SECOND file you saved ( Warning- both must be in
SAME direction, AZMATH, or ELEVATION for this to overlay) , and both ants
pointing the SAME WAY!

Step 6 either print it, or add another file .
Think you find this works pretty well .
NOTE: this DOESN'T set the max gain to BOTH
antennas, but is great for comparison purposes.

Ok, thanks Jim, I have done this and add a trace does just
that, but as you say,
"this DOESN'T set the max gain to BOTH antennas"
I want to equalize the max gain, So it looks like the copy to
Paint and compare there is the best solution so far.
Thanks, Mike