View Single Post
  #22   Report Post  
Old July 5th 07, 12:49 AM posted to rec.radio.cb
Telstar Electronics Telstar Electronics is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 985
Default Learn How VoiceMax Increases Your Transmission Range...

On Jul 4, 10:37 am, Frank Gilliland
wrote:
No, I don't. That's why I want to run it through the bench. The only
thing I'm sure that works is the noise gate, but I still don't see the
point since all it does is shut off the audio when you're not talking
to eliminate ambient noise. And it's that ambient noise that let's the
other guy know that you're still keyed up. A noise gate would make
your radio sound like a cheap speaker phone, or that crappy digital
voice from Comcast. Hey, here's an idea -- when you're done talking,
why not just unkey the mic?


Well... I still don't know why you would want to bench test something
that you have said doesn't work from day one. But that aside... let's
talk about the significance of the noise gate. Your understanding of
the way the noise gate works is correct. When the audio falls below a
user-defined threshold... the audio mutes. If you stop to think that
the VoiceMax has very high gain in the AGC... you realize that any low-
level background sound will be greatly amplified... up to around
+60dB. Without the noise gate... the hissing and wind noise in the
background between words would be extremely distracting. The
background noise detracts intelligibility from the voice signal. This
blocking of background noise between words helps the vocal clarity of
the transmission. It's really quite effective .. and the audio quality
is excellent. It certainly doesn't sound like a cheap speakerphone.
The speakerphone is quite different as the the person is quite a
distance from the mic in that application. This does present a big
problem... since the S/N ratio in that appliaction is very poor.
That's why speakerphones sound hollow... due to room acoustics... and
many times are choppy on transmit/receive... because of the poor S/N
ratio... and therefore very critical threshold setting. So far there
are eight pre-production units in the field right now. I haven't had
one complaint or problem. I have two installed in both my Cobra19 and
Cobra25 using the stock mic on one... and the Astatic 636L on the
other. They both work like a million bucks. I have the audio of a
power mic... without all the background noise. In my book... that's
the best of both worlds. My on-air experiences so far in the past few
months have substantiated my beliefs that the clarity is enhanced. I
came to that conclusion knowing how much less I've had to repeat
transmissions.