In article ,
"Rollo Tomassi" wrote:

Hello,

My Yeasu FT1000D has no RX on the SUB-receiver until ... i touch the coils
from the RF-section T1028 and T6001 in the SuB-RXsection.
The same is that on D 1060 on the RF-section.
The RX on the sub is then coming back.
Between T1028/D1060 and T6001 is a bleu coax-cable.
I checked the bleu cable who connects the SUB-RX section with the RF-section
but that cable is OK.
I checked relay 1004 on the RF-section but is OK.
Main-RX is 100% .
Do someone has a solution except to bring it to the repairman ( He is on
holiday,HI)

take it out and look carefully with a magnifier for cold solder joints
on the foil side or where ever there are solder joints. Otherwise I
don't know unless it may be a oscillator not running until you touch
something.

Good luck.

--
Email: