On Mon, 09 Jul 2007 10:42:53 -0700, Telstar Electronics
wrote:

+++On Jul 9, 12:03 pm, james wrote:
+++ the SSM2166 draws about 10mA of current. Four NiMH AA batteries have
+++ 1800mAhr capabilities. At full charge that delivers 5.6VDC to the
+++ chip. Well within the operating range. Should get about 150 hrs of
+++ operation. Add a charging circuit and you have no more issues.
+++
+++James, you are very similar to Frank... in that you have distinct
+++ideas. The problem you both have is one of conveyance. I have made
+++every effort to answer your questions in a civil manner... but you
+++continue to rant uncontrollably. I'm not sure by what authority you
+++speak... since you have no design of your own. Therefore, the
+++conversation with Frank and James is ended as far as I'm concerned. If
+++some others have questions, I'd be more than happy to attempt to
+++answer you. If you don't wish to use this forum... I fully understand.
+++Please email me anytime.
+++www.telstar-electronics.com
****************

I am not ranting and raving. I am pointing out facts. I have 23 yrs
experience in designing battery powered electronic devices. You stated
that a external unit is not practicle and I say it is. If that is
ranting and raving to you then so be it.

james