View Single Post
  #2   Report Post  
Old July 20th 03, 09:22 PM
Irv Finkleman
 
Posts: n/a
Default

Scott Drumm wrote:

Anyone tried this out on their HT? Does it work as advertised?

http://rattailantenna.com/

I was thinking about buying one for my IC-T22A. I've replaced the stock
rubber duck w/ a Smiley SLD-2 12" 5/8 antenna, but want to see if I can
reach some more distant stations.

Thanks for the help!

Scott Drumm
N3XFD


You would do as well if you took 19 inches of wire with an alligator
clip and connected it to the ground side of your rubber ducky. It
acts as the other half of a half wave dipole. Just let it hang there, its
placement is not very critical.
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/
Visit my very special website at http://members.shaw.ca/finkirv4/
Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada