RadioBanter - View Single Post

J. B. Wood · August 14th 07, 10:22 PM posted to rec.radio.amateur.antenna

In article , wrote:

J. B. Wood wrote:

The challenge here is, given a transmission line of certain physical
length, to find a measurable value at the operating frequency(s). An RF
signal source with a surplus (but in proper operating order) General Radio
(Genrad) impedance bridge is good for this type of measurement. Keep in
mind that any coupling from the line to nearby structures will affect the
measurement. Sincerely, and 73s from N4GGO,

Even more of a challenge might be getting that impedance bridge to work
at 1 GHz...grin

Hello, and I must have had a senior moment. Forgot what freq the OP was
interested in. Too many years spent making measurements in the 2-30 MHz
band I guess ;-) Of course now we're looking at a vector network analyzer
to make the measurement (not something most Hams have in the shack). I
wonder if MFJ has anything? Sincerely,

John Wood (Code 5550) e-mail:
Naval Research Laboratory
4555 Overlook Avenue, SW
Washington, DC 20375-5337