On Sep 1, 5:42 pm, dxAce wrote:
Telamon wrote:
In article ,
dxAce wrote:

Telamon wrote:

In article ,
dxAce wrote:

D Peter Maus wrote:

dxAce wrote:

D Peter Maus wrote:

dxAce wrote:
dxAce wrote:

D Peter Maus wrote:

How's that Eavesdropper working for you?
Not sure! I haven't completed the installation yet. It is
in the air, and has been for a while, but I've not
completed the coax run yet.

I was thinking about doing it today, but I had a lot of
stuff to take care of yesterday and my back she no feel
too good.

Perhaps tomorrow.
One thing I forgot to add was that my neighbour was up on a
job in Rockford, MI doing some heating and cooling work and
he spied a nice aluminium flagpole that was being thrown
away due to some storm damage at the base of it.

We cut off the bad part, (about 1 foot) and it's still 22'
long. Now if I sink it 2-3' into the ground in a suitable
piece of pipe I'll have a nice free-standing center support
for the Eavesdropper.

Would you really want a 22 foot metal center support?
Although it may be one of the world's most extravagant
ground lugs...there is that whole lightning thing.....

Sure, why not. My scanner antenna is on a metal mast a bit
higher than that.

Not hit... Yet!

Oh, well then, screw it. Mount it high and solid, and put a US
ensign atop, with a flood for night time.

It'll be strictly for the antenna once I get going on that part
of the project. But if I finally decide I'm not happy with the
Eavesdropper then I'll either come up with another antenna
project or just use it for a flagpole.

You might want to consider using it as a vertical antenna. It would
complement your existing horizontal antennas.

I'd only consider using a vertical as a last resort. Been there, done
that. They receive equally poorly in all directions.

You might want to give it another shot. Antennas at different
orientations will work better at different times of the day/night.

Been there, done that. No thanks.

dxAce
Michigan
USA- Hide quoted text -

- Show quoted text -

Have you ever gone the loop route? If so, how did it work for you?

Steve