Chinese on AM 650?
On Sep 23, 6:12 pm, Nobody wrote:
On Sat, 22 Sep 2007 20:29:28 -0700, RHF
wrote:
On Sep 22, 5:53 pm, "Bebo" wrote:
I hooked my 80 meter dipole to my Sherwood receiver and was listening to
WSM....Grand Ole Opry outta Nashville on 650 when a Mandarin Chinese
station started coming in and out....Time here is 01:52 UTC
BOBO
BoBo,
Next time that this occurs :
1 - Select your Narrorest AM/SSB IF Filter on your Radios :
2 - Tune down from 650 kHz to 648 kHz
=IF= the Signal improves and the Listening is easier
then 'most likely' you have a "Non" North American
Chinese Language Medium Wave Radio Broadcaster.
+ Plus -if- you have USB & LSB - Try LSB on 648 kHz
to get rid of much of WSM on 650 kHz.
=IF= the Signal weakens and the Listening is more
difficult then 'most likely' you have a North American
Chinese Language AM/MW Radio Broadcaster.
hope this helps ~ RHF
Probably not.
First, why if the poster is "hearing" something in Chinese does it
have to be from China?
Second, let's establish exactly where the poster is located?
Third, what "standard" of receiver/antenna is the poster using?
Fourth, even if the poster has a reasonably sophisticated
receiver/antenna system, other factors could be at play (i.e.
receiver-generated garbage).
Fifth, more details are needed to even speculate on the source.
Sixth, even if in wildest dreams, the poster (supposedly in North
America) was in a receiving location that could log "direct from
China" 648, then WSB/650 would conversely be a virtual impossibility
at the same time.
Seventh, we need more information.
Oh, sorry, I repeat myself.
- Yeah, I know... a wet blanket...
A Good Thing To Have - When You Are On Fire ~ RHF
unnecessary tags snipped- Hide quoted text -
- Show quoted text -
|