Ping James
On Mon, 24 Sep 2007 19:46:55 -0400, james wrote:
I am not really familiar with either radios. Without seeing the input
circuit my first inclination is to do a DC block and secondly to do
some simple form of impedance matching.
As for the second radio not requireing the cap, that could be due to
the radio not being manufactured at the time the T-UG8 stand was made
so that Astatic did not know of it. Also the mic input maybe a bit
different despite the rest of the radio circuits being identical. A
lot of radios were made to work with dynamic mics and required low
impedance inputs. The D-104 line works well with tube rigs which are
usually high input impedance.
james
I am thinking DC block. One of the pins has hi voltage. I have to see if it
jives with the white wire.
Vinnie S.
|