Anti-PC wrote:
I have a very old Mosley TA-33 Jr antenna and one element; the smaller tube
is stuck in the larger tube. This is the middle tube and only 3 foot long
and about 3/4 inches in diameter with about 1 inch sticking out of the
larger tube. I have tried pulling then apart with a bumper jack and vice
grips but have had no luck. The elements are not bent nor do they have any
dents. I suspects oxidation of the elements is the problem. I have also
tried using ammonia but no help. Any suggestions on pulling then apart would
be greatly appreciated. .
Bob, AA8X



A penetrating oil (as has already been suggested) is a good trick.

Then, with a rubber mallet, gently, but firmly, strike the outer
conductor (where it covers the inner conductor)--with the conductor
placed on a firm surface (hardwood, etc.), all the time rotating the
conductor betweens strikes.

Has worked EVERY time for me!

Regards,
JS