View Single Post
  #2   Report Post  
Old October 10th 07, 04:21 PM posted to rec.radio.shortwave
Simon Mason Simon Mason is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 17
Default JRC NRD 525 problem.


"BDK" wrote in message
...
In article ,
says...
Just got a used NRD 525 from ebay, connected it up and it is as deaf as a
post. Just audio hash on all bands. Even local AM is dead. I also have a
Grundig 800 which receives fine on the same antenna, so it's not the
aerial.
Has anyone any tips? I have turned down the squelch etc etc.
Regards,


--
Simon Mason
http://www.simonmason.karoo.net




This could be a very minor, no cost thing to fix.

Make sure it's unplugged.


Take the top off, SLOWLY, don't break the speaker lead! Unplug it, and
set the top off to the side. Look to see if one or more of the boards
has popped out during shipping. This is very common, since the radio is
shipped with a hunk of foam rubber on top of the boards originally, and
is supposed to be removed before you use the radio. Lots of times they
are still there 20 years later. If it was gone, and it probably was, the
boards can easily be popped out by the package bouncing around during
shipping.



Thanks for the advice guys, you were right BDK - it was a case of two of the
PCBs being loose on the mother board! It's OK now :-)
Simon