On Oct 26, 10:40 pm, wrote:
On Oct 26, 7:23 pm, "Dale Parfitt" wrote:

I have not owned the PRO, but did own the original 746 in addition to all
the 756's- have the 756PRO III now. They are all deaf below 500KHz because
of the HPF Icom switches in when tuning MW and lower. I seem to recall the
PRO's (756) also have an attenuator that is automatically switched in around
1.5MHz. I use a Palomar LF converter on the RX only port for LF reception on
the PRO III.

- That's a showstopper for me if it can't be fixed.
- Is there a published mod to un-cripple performance below 1500 KHz?

List of "MODs" for the Icom IC-746 Pro Receiver
http://www.dxzone.com/catalog/Radio_...s/Icom_IC-746/

* Icom IC-746 Pro Receiver Impressions and Mods.
http://www.kongsfjord.no/dl/Icom/IC-...20&%20Mods.pdf
-by- Dallas Lankford [www.kongsfjord.no]
Swedish Short Wave Bulletin = http://tinyurl.com/ys2xxa

~ RHF