On Nov 5, 5:21 am, David wrote:
On Sun, 04 Nov 2007 00:17:26 -0000, wrote:
On Nov 3, 5:49 pm, Telamon
wrote:
In article .com,
wrote:
If you need to prototype or build a lumped element RF filter, check
out the RF Filter PCBs at RF Bites.
http://www.rfbites.com
Those are not very good coax to PCB connectors. You can do better. Must
be pretty low frequency stuff ( 1 GHz ) if you are using FR4.
--
Telamon
Ventura, California
Connectors are rated to 12GHz.
FR-4 is good up to 3.5GHz, then it starts to fall apart.
http://en.wikipedia.org/wiki/FR4- Hide quoted text -
- Show quoted text -
David - Good Info and Link. ~ RHF