View Single Post
  #17   Report Post  
Old December 4th 07, 01:53 PM posted to rec.radio.amateur.antenna
Ed Cregger Ed Cregger is offline
external usenet poster
 
First recorded activity by RadioBanter: Sep 2006
Posts: 236
Default opinions on an antenna idea

Ed Cregger wrote:
Alan Peake wrote:


Roy Lewallen wrote:
Alan Peake wrote:


If one were to find lossless material (superconductors?) for the
short antenna and it's corresponding matching network, what would
happen as the antenna became shorter and shorter compared with the
half-wave dipole? Would it simply approach an isotropic radiator?
Alan


No. The answer can be found in any antenna textbook,

...
etc.

Roy Lewallen, W7EL


Thanks Roy. Unfortunately, since I retired, I no longer have access to
Jasik, Kraus etc. So, thanks for the answer. I should have realised
that a dipole of any length is still a dipole and as such will not
radiate off it's ends. Mind you, Eznec shows the average dipole, less
than half-wave above ground, goes pretty close to an isotropic
radiator for all practical purposes
Alan



---------------


You appear to be extrapolating, if I see this correctly, that since all
of the radiation is believed to come from one end of the dipole, then
the rest of the antenna is merely acting as the necessary reactances and
resistance needed to obtain the proper feedpoint impedance at a given
frequency. True?

Following that line of reasoning, if the need for the aggregate
reactances/resistances can be eliminated via superconducting elements,
one will have just a single point source of radiation. Or, what is
commonly known as an isotropic radiator. I suspect that the plasma
antenna fellows are contemplating this too.

Ed, NM2K



-------------


Bellsouth, now AT&T, is back to double posting everything again. Was
having problems with their DSL service all last night. Wish they would
get their act together.


Ed, NM2K