Thread
:
Matching 70 cm Yagi to coax feedline
View Single Post
#
4
July 11th 03, 04:01 AM
MikeN
Posts: n/a
Thanks Tom
What 1:1 balun construction would you recommend.
MikeN ZL1BNB
On 10 Jul 2003 12:04:58 -0700,
(Tom Bruhns) wrote:
MikeN wrote in message . ..
Hi all.
I've got a 70 cm Yagi which is to be matched to a 50ohm feedline,
feeding a 70cm repeater (5MHz split).
The Yagi has an impedance of 12.7+j0.8 (so 4NEC2 tells me).
...
I've simply used a folded-dipole (equal diameters for the two
sections) driven element in similar cases. That should give you very
close to 50 ohms. It's balanced, so use a 1:1 balun to get to 50 ohm
coaxial.
Cheers,
Tom
Reply With Quote