View Single Post
  #2   Report Post  
Old January 7th 08, 07:35 PM posted to rec.radio.shortwave
RHF RHF is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 8,652
Default WHY - Bury Your Shortwave Radio Listening (SWL) Antenna'sCoaxCable Feed-in-Line ?

On Jan 6, 9:17*am, RHF wrote:
On Jan 5, 11:53*pm, RHF wrote:





On Jan 5, 4:25*pm, Carter-k8vt wrote:


RHF wrote:
Undeniable Fact # 1 - The Man Made RFI-EMF Environment
Has Changed Greatly : Increasing one or two Magnitudes from
the 1930s to the 1990s.


Undeniable Fact # 2 - Man's Ability to Accurately Measure the
RFI-EMF Environment and It's Effects Has Changed Greatly :
Increasing at least a Magnitude from the 1930s to the 1990s.


- Undeniable Fact # 3 - According to a direct quote of Doty,
- UN-shielded lead-in wires are susceptible to noise.
- Coaxial cable is SHIELDED. So why does Doty say bury it?


Fact is most Coax Cable does not have a perfect Shield.


- Undeniable Fact # 4 - Even though the RFI environment has
- changed and even though man's ability to measure it has
- changed, burial in a few inches of soil provides no noise
- mitigation.


You provide no Empirical Data to dispute my Anecdotal Observations.


- Undeniable Fact # 5 - Yes, the environment has changed and
- measurement techniques have changed, but that does NOT
- mean the Laws of Physics have changed.


I would have to conclude that 'our' knowledge of the Laws of
Physics has improve from 1930s to 1990s.


- Finally, for the sake of this discussion, assume your neighbor/
- neighborhood is throwing out a lot of RF hash and trash.
- Furthermore, let us assume you've buried your coax in hopes
- of alleviating the problem (even though it won't).
-
- What, pray tell, is to keep this neighborhood RF hash and
- trash from impinging directly on the antenna itself and being
- piped right in to your receiver?


Nothing -but- that's the Antenna itself -and- at least it ain't the
Coax Cable feed-in-line; acting as a Noise Pick-Up Antenna.


- -If you need to avoid the lawn mower, bury by all means.


Good Point.


- -If you need to avoid the wrath of your wife, bury by all means.


She Who Must Be Obeyed - Must Be Happy Too !


- -If you want to bury to mitigate noise, save your time, trouble and
energy.


Alas it is 'my' Time and Money and to 'me' it is Worth-the-Trouble :
To Do It Right !


Oops You Forgot : # 2 - Dang - See # 1 + Safety - It's a Tripping
Hazard.


KEY POINT - Burying the Coax Cable is simply one of the many
Synergistic Elements that goes into making a Low Noise
Shortwave Radio Listening (SWL) Antenna -a-la- John Doty


1 - At the Antenna using a Matching Transformer between the
Antenna Element and the Coax Cable feed-in-line. {The Far-End}


2 - Plus a Ground Rod at this Matching Transformer.


3 - Near the entry to the House using an Isolation Transformer
between the Coax Cable feed-in-line and Coax Cable going
into the House to the RadioShack. {The Near-End}


4 - Plus a Ground Rod at the Isolation Transformer.


5 - Bury the Coax Cable feed-in-line between the Two Ground
Rods and Transformers.


Number "5" is realy only important when you have first
accomplished Numbers 1~4.


Effectively the Outer-Shield of the Coax Cable is :
1-
2-
3-
4-
5-
etc...


Three Rec.Radio.Shortwave Messages to Read -by- John Dotyhttp://groups.google.com/group/rec.radio.shortwave/msg/1abc6a2bf8acc12d
* SWL Longwire
* Low Noise Antenna Connection
* Grounding Is Key To Good Reception


John Doty will tell you that he did not Invent any of these things
or Uniquely Combine them to Create a New Concept. *He more
or less studied what was out-there and empirically tried things
until he found what seemed to Work : "The Best". *He Wrote about
them; and Help to Popularize them in the 1990s in the Shortwave
Radio Listening (SWL) community. *As far as I know he makes
no claim that any one of these things will work by itself -but- as
a group they do improve things greatly over a simple Classic
Horizontal Bare Wire Antenna with an Insulated Wire feed-in-line
-or- an Improved Horizontal Bare Wire Antenna with a Coax Cable
feed-in-line.


step-by-step - one-step-at-a-time - the endless quest for
better shortwave radio listening (swl) - iane ~ RHF
*.


KEY POINT - Burying the Coax Cable is simply one of the many
Synergistic Elements that goes into making a Low Noise
Shortwave Radio Listening (SWL) Antenna -a-la- John Doty

1 - At the Antenna using a Matching Transformer between the
Antenna Element and the Coax Cable feed-in-line. {The Far-End}

2 - Plus a Ground Rod at this Matching Transformer.

3 - Near the entry to the House using an Isolation Transformer
between the Coax Cable feed-in-line and Coax Cable going
into the House to the RadioShack. {The Near-End}

4 - Plus a Ground Rod at the Isolation Transformer.

5 - Bury the Coax Cable feed-in-line between the Two Ground
Rods and Transformers.

Number "5" is realy only important when you have first
accomplished Numbers 1~4.

Effectively the Outer-Shield of the Coax Cable is/does :

# 1 - Connects both the Antenna Ground and the House's
Feed-in-Line Entry Ground {RadioShack Grounding Point} :
-Thus- "Bonding" these two Grounds.

2-
3-
4-
5-
etc...- Hide quoted text -

- Show quoted text -


KEY POINT - Burying the Coax Cable is simply one of the many
Synergistic Elements that goes into making a Low Noise
Shortwave Radio Listening (SWL) Antenna -a-la- John Doty

1 - At the Antenna using a Matching Transformer between the
Antenna Element and the Coax Cable feed-in-line. {The Far-End}

2 - Plus a Ground Rod at this Matching Transformer.

3 - Near the entry to the House using an Isolation Transformer
between the Coax Cable feed-in-line and Coax Cable going
into the House to the RadioShack. {The Near-End}

4 - Plus a Ground Rod at the Isolation Transformer.

5 - Bury the Coax Cable feed-in-line between the Two Ground
Rods and Transformers.

Number "5" is realy only important when you have first
accomplished Numbers 1~4.

Effectively the Buried Outer-Shield of the Coax Cable is/does :

# 1 - Connects both the Antenna Ground and the House's
Feed-in-Line Entry Ground {RadioShack Grounding Point} :
-Thus- "Bonding" these two Grounds.
http://www.hamuniverse.com/grounding.html
http://www.mikeholt.com/newsletters....y&letterID=134
http://mikeholt.com/mojonewsarchive/...2~20041005.php

# 2 - Functions as a Ground Radial for the Wire Antenna
Element to 'unify' the "Ground Effect" {Ground Conductivity
Efficiency} between the two Ground Rods.
http://www.sgcworld.com/radialstechnote.html

# 3 -IF- The Wire Antenna Element is hung in the Air 'over'
this Buried Coax Cable it is in-effect a Counterpoise to the
Wire Antenna Element.
http://www.cebik.com/gp/cps.html

READ - WHY - The Far-End-Fed Shortwave Listener's (SWLs)
Inverted "L" Antenna
http://www.google.com/group/rec.radi...cfc6b9cb2447c0
http://groups.yahoo.com/group/Shortw.../message/11698

4-
5-
etc...