keeping wire antennas up
On Fri, 18 Jan 2008 12:36:01 -0800, "Juan M."
wrote:
This system works fine until our winter storms kick in. Often, during those
storms, a tree will lose a limb or two and take the antenna down with it. I
am then left with a halyard tied to an insulator 50 ft or more above the
ground with no way to get the insulator back down short of hiring another
costly climber.
Does anyone have any solutions to this problem?
Hi John,
From Rain City (Seattle). I did this in a Maple forest. I did mine
with pulleys top and bottom with a continuous loop like a flag pole. I
then passed up another pulley on that loop for the runner holding the
wire antenna. Then I made sure it would break at the wire connection,
not the rope. The continuous loop always gave me access to the pulley
that the antenna rope passed through. I used a two liter bottle of
water to ballast and tension the wire pulley system.
Think FUSE. Choose your point of failure, don't let it happen.
73's
Richard Clark, KB7QHC
|