Thread: ICOM 735
View Single Post
  #5   Report Post  
Old February 10th 08, 10:44 PM posted to rec.radio.amateur.equipment
DaveM DaveM is offline
external usenet poster
 
First recorded activity by RadioBanter: Nov 2006
Posts: 44
Default ICOM 735

"DaveLG" wrote in message
...
On Feb 6, 3:36 pm, Frank wrote:
I am new to ham radio.

I was given an Icom 735.

Set up radio per owners manual. Using a wire antenna (set up for
10meters), an MFJ tuner.

I am not getting any signals at all. Double checked all connections
and set per manual again.

I could use a few suggestions.


Check out the WWV time signals. The 10MHz signal is pretty powerful



Do you have, or can you borrow, a signal generator that covers the band(s)
you're trying to receive? If so, connect the generator to the antenna connector
on the radio, tune both to an in-band frequency, and see if the receiver works.
Could be that the radio had problems... that's why it was given away.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra