-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I'm working QRP (5W max) and I'm construction my own antennas. I've
read that antenna efficiency can be degraded by "high ohmic connections"
(especially deleterious to QRP ops). I'm assuming that we shouldn't
make potato-sized solder joints when assembling the antenna. So, I was
wondering what would be the best way to connect various parts of the
antenna?

Example: I've created a 4:1 balun based on Ron's (VK2DQ) description in
his article "Understanding and building the OCF dipole." The toroid
windings had to be connected. So, rather than twist them together (they
are 18 AWG) and solder them, I laid the pieces side-by-side (abt 1/4")
and solder them together. Is that a "high ohmic" connection? If so,
what other way could the pieces be soldered together w/o creating a high
ohmic connection?

For other parts of the antenna (e.g., the feed-point) would connectors
(quick release, ring type, etc.) be better than a solder joint?

Thanks,
--
MGFoster:::mgf00 at earthlink decimal-point net
Oakland, CA (USA)
KI6OFN

-----BEGIN PGP SIGNATURE-----
Version: PGP for Personal Privacy 5.0
Charset: noconv

iQA/AwUBR7Nvi4echKqOuFEgEQIUIQCg2fSd/P9gK8ANzngBvKLQ0uj72qwAoIxS
1sXN9l/C5N9aeftVEm6iqqPp
=f3tu
-----END PGP SIGNATURE-----