View Single Post
  #17   Report Post  
Old March 5th 08, 06:03 PM posted to rec.radio.amateur.antenna
Jim Lux Jim Lux is offline
external usenet poster
 
First recorded activity by RadioBanter: Mar 2007
Posts: 801
Default WiFi Link from top of tower

Jimmie D wrote:
"Jerry" wrote in message
news:xU3zj.9633$C1.1984@trnddc07...

" W4NNG" wrote in message
news
Thanks for all the suggestions

Don't understand the '... second wireless adapter ...' suggestion?
where's
it get power?

I've got an EUB-362EXT adapter. (has an SMA connect) Was the longest
range
device I could find. Antenna will be connected directly to it, rather
than
using the adapter dipole inserted inside a reflector

FWIW - The EUB adapter significantly out-performs a low cost linksys usb
adapter both using their own antenna's. Parked at same location linksys
found 2 WAP's the EUB found 8


Hi Bob

It would seem that Frank's (KN6WH) suggestion about using a Bridge or
Router, or Switch avoids alot of the USB limitations. Have you tried
using a CAT 5 device located at the top of the tower?
I thought the CAT 5 devices were far better than USB for remote WiFi.
But, if you have data / experience that shows otherwise, I'd like to learn
more about why the USB is chosen.

Jerry KD6JDJ


Placing a wireless router at the top of the tower is not a solution. I am
assuming of course that the OP wants to connect to other wireless routers. I
wanted to do something like this and all the computer tech people I asked
said wireless routers dont talk to each other wirelessly.

Depends on the particular wireless box. Some D-Link boxes, for
instance, have a point-to-point or point-to-multi-point capability.

Also, if the box at the top of the tower is an access point in
infrastructure mode, it essentially repeats packets that it receives.
This is so that two computers that are connected to the AP can talk to
each other.