813 warm up time
On Tue, 1 Apr 2008, Rick wrote:
How long after applying filament voltage till the 813 is ready to transmit?
Is it like a 3-500 or do I have to wait 30 seconds or so?
Rick K2XT
When the glow is up to bright orange, then you are ready. If you apply the
filament voltage without "management" (i.e. a slow increase over, say 5-10
seconds), the tube should be ready for transmit in, like, about 1-2
seconds. In a heater cathode (rather than a filament cathode), you need to
wait for that thin "coat" to come up to a dull orange and that can be half
a minute or so depending on the tube.
|