Barrett wrote:
I don't think that my MFJ-259Z is charging properly. Its new and it has been
on charge for over 6 hours and all the batteries are still reading 0 Volts.
I'm using the PSU that came with it. It works fine from the PSU but doesn't
seem to be charging. The switch inside for charging is turned on.. Can some

I'm not familiar with that analyzer but the websites indicate it uses AA
cells--presumably rechargable ones have been supplied with your 259Z. One
thing to check is that the cells are correctly inserted (sorry but it
happens often!) and that they're not protected by little plastic covers on
the positive terminals. Rechargable batteries that come with new
equipment often have tiny bits of plastic that have to be removed by the
end user. This isn't always mentioned in manuals.

If it's brand new and has never worked with the batteries alone, you might
have a manufacturing defect--they're not unknown in MFJ gear, not that I'm
knocking MFJ. You'd want to take a quick look at the charge/no-charge
switch, the bypass (if there is one) on the connector for the PSU on the
radio, etc.--simple things easily visible. You might also try charging
the AA cells in a standard charger, and seeing if the 259Z then works
properly with the batteries--if that doesn't work, it might be the cells
you have and not the analyzer itself.

HTH! 73 de AC4RD

_______________________________________________
Ken Kuzenski AC4RD atsign mindspring dotsign com
_______________________________________________
All disclaimers apply, see? www.duke.edu/~kuzen001