I thought Richard's statement that modeling would tell you about how the
design might perform, was good advice. If you use EZNEC, I'd be willing
to help you if you dont already know how to use it to model your antenna.

Jerry KD6JDJ


Jerry, thanks for the offert.
I dont know how good these modelling programs are in this situation.
But if it is easy, so could somebody do the following:

Take 20m of wire, that is half of a dipole.
Put a 1/4 electric wavelength shorted stub for 10,1MHz so that the open end
is 7,25m from center and the shorted end pointing to the tip of antenna. One
side of stub is the 20m wire itself, like in the upper picture. Ignore all
velocity factors to make it sinple.
Now tell me what are the resonance frequencies of that kind of element and
if possible feed point impedande (80m and 30m)

I know I could do it myself but as you know learning to use a new program
reliably takes lot of time.

73 Jouko OH5RM