View Single Post
  #8   Report Post  
Old April 18th 08, 03:30 PM posted to rec.radio.shortwave
Michael Michael is offline
external usenet poster
 
First recorded activity by RadioBanter: Aug 2006
Posts: 49
Default Minimum gauge for groud...


"RHF" wrote in message
...
On Apr 17, 2:21 pm, "Michael" wrote:
"Michael" wrote in message

...

Hiya...


Hiya...

Got the 6' solid brass ground rod and 24' ground strap today from ICE. We
have clear weather forecast here for Saturday, so I plan to pound it into
the ground. I'll mount the balun to the foundation low to the ground and
connect the ground strap. I ordered 100' spool of antenna wire and a 100'
length of coax. If they arrive in the next day, I'll be able to put it up
Saturday along with the balun and ground spike. Then I can test it out
Saturday night. If I don't get the antenna wire and other goodies by the
weekend, it will have to wait another week for completion and testing. I'm
glad I also have the 102' G5RV to test it against. That antenna is
currently laying on my roof in the shape of a sigma. I plan to leave it as
is.

I'd say the 6' brass rod into the earth is a better ground then the brick
chimney, but I don't think it will out perform the whole uncooked chicken.

I'm still not sure if I should also ground the radio in the shack. The
radio is on the second floor in the house, so any ground wire would have
to
be about 75' long to reach the spike, unless I just ground it to the iron
radiator... or a chicken. I use a six receiver, six radio MFJ- 1700C
switch
to go between antennas and my two radios. The new properly grounded
inverted L will always be hooked up to the switch along with both my
radios
and all antennas. Given that one antenna is well grounded and all items
are
hooked up to the same switch via shielded PL-259, will the other radios
and
antennas benefit from that one single grounded antenna ???

Forgive me for being a total retard here... My first ever antenna was a
roll
of aluminum foil and an alligator clip :-) I'm making some progress...

Mike D



Michael,

In the location where you plan on sticking your Ground Rod :
Take the time today to dig down about a Foot Deep and a
Foot around {Hole} and Fill the Hole with Water Today, Friday
and Saturday {Soak the Ground}. Pounding the Ground Rod
into the Soil should be a little easier. Stop pounding the Rod
into the Soil when you have about 6"~8" above the normal
Soil level left to do. Fill the Whole with Soil and Tamp and
the Soil Down {Walk-On-It}. Pound the Rod a little further
into the ground and leave about 2"~4" of it above the Soil
Level.

Thank you. I was just wondering how much of the rod to leave above the
ground. I read a few articles that say no more then 4" is idea. Is it OK if
the clam that holds the strap on the rod is above the burry line ??? I want
to be able to see that is still attached every now and then :-)

Michael