Thread: will it work?
View Single Post
  #7   Report Post  
Old May 15th 08, 01:41 AM posted to rec.radio.amateur.antenna
Hal Rosser Hal Rosser is offline
external usenet poster
 
First recorded activity by RadioBanter: May 2007
Posts: 97
Default will it work?


"John KD5YI" wrote in message
news:sECWj.3663$lj.2181@trnddc01...

"Hal Rosser" wrote in message
. ..

"rb" wrote in message
...
Thinking of putting a vertical up. I'd go from 2" pvc, to 1", to 1/2" ,
in twenty foot lengths. Will this thing support itself OK? Seems like
it might physically work OK.


Been there tried that-
It won't work.
I tried sched 40 plumbing PVC and the gray PVC sched 40 (electrical).
Pvc is ok for a 2-meter quad - but use alum or steel mast,
you may try the top-post they use for chain-link fences - I think you can
get it in 20-ft lengths.



I don't recommend that, either. It is heavy and bends easily. The radio
shack TV antenna mast works better.

Sorry to be the bearer of bad news.


I have used the chain-link-fence-Top-Post and it worked fine. It was
available in 20-ft sections when I tried it.
Its made of Galvanized steel - thinner than sched 40 but stiff enough for a
mast for small antenna.