View Single Post
  #7   Report Post  
Old July 10th 08, 02:50 AM posted to rec.radio.amateur.equipment
Ralph Mowery Ralph Mowery is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 702
Default Isolation Transformer Purpose?


"GregS" wrote in message
...
In article , "Ralph
Mowery" wrote:

wrote in message
...
I'm not a ham operator! But I figure you guys can explain what an
Isolation Transformer does.

I came up with one at an estate sale this weekend of a former TV
repairman. Among the 1970s vintage test equipment and color bar
generators was this xfmr. This unit says "Isolation Transformer 5
Amps, 600 Watts" on one side and "Isolation: Primary 120 VAC,
Secondary 120 VAC" on the other. It's about 8" square and as you can
imagine, quite heavy.




Isolation transformers such as the ones Tripplite sells, do filter well.
They also eliminate the ground to line spike issue. One leg of the
secondaries
is tied to ground, eliminating any differential noise.

greg


While there are transformers designed to keep out spikes and filter the
line, you have to look at the question.
The transformer was mentioned was with test equipment. Usually it is to
isolate the hot chassies, not to eliminate spikes and noise.