On Jul 11, 1:41 am, "Ed Cregger" wrote:
I finally found my old relay box used for keying my amp. I did not find the
paper sheet that came with it showing the connections. Three connections
must be made, but there are five ports. I have hooked it up in what I
consider to be the logical way, but my radio immediately returns to receive
when keyed. I seem to remember a trick (alternate hook up) but do not wish
to damage the radio via experimenting. I'm kind of goofy these days due to
medications, so I don't trust myself to make the connections by intuition.
I'm using an Ameritron AL-80A amplifier and a Yaesu FT-890/AT rig.

If someone could make a .jpg of this manual and email it to me via
, I would appreciate it very, very much. Thanks.

Ed Cregger

Or you can follow this?
Relay box marked "TX" goes to amp relay terminal that keys the amp.
Relay box "red" cable connects to 13.8vdc on rig, "Blue" cable
connects to PPT line on rig.
Hope this helps?
Rich WA2RQY/4