RadioBanter - View Single Post

John Smith · September 4th 08, 03:47 AM posted to rec.radio.amateur.antenna

wrote:

...
Because the input and the out windings of the balun must be isolated
at least at RF of interest, OF COURSE there should be a high impedance
between the ballanced current flow and the unbalanced current flow.
However, the impedance of the source looking into the impedance from
the souurce should match source impedance and the impedance of the
load looking in the output winding of the balun should match the load
impedance (say 70 ohms, or 600 ohms or whatever your antenna or
trnasmission line impedance is. The impedence at frequency of interest
between input winding and output winding should be infinity for
isolation purposes (obviously you do not want to mix the unbalanced
input and balanced output currents.

Hey, are you just a plain idot, or someone who lacks any ability at all
to apply logic? ROFLOL

In all my time here, years!, I have never seen as large an idiot as you!
My Gawd, you make the dummies here begin to seem logical!

Regards,
JS

--
It is like a nightmare where the public servants are the people which
the police are supposed to protect us from!