View Single Post
  #12   Report Post  
Old September 13th 08, 05:17 PM posted to rec.audio.tech,rec.radio.amateur.antenna
Jeff Liebermann[_2_] Jeff Liebermann[_2_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Jun 2007
Posts: 1,336
Default Any audible signals on a 40 Hz AM radio?

On Sat, 13 Sep 2008 08:42:53 +0100, Ian Thompson-Bell
wrote:

Green Xenon [Radium] wrote:
Hi:

What would be heard on a 40 Hz AM DX receiver that uses the most
sensitive type of magnetic loop antenna? I doubt there would be any
hissing since that artifact would involve high-frequency sounds and a
40 Hz carrier cannot transport modulation-signals higher than 40 Hz
[violation of Nyquist theorem].


Not strictly true I think - depends on the modulation scheme - how else
do you think we manage to get 56K bps down a 3KHz phone line.


Ummm... Mr Radium clearly specified that he's using AM as in amplitude
modulation. If there were a different method of modulation employed,
methinks he would have specified it. You can get more bits per baud
out of relatively narrow bandwidths. The various HDRadio schemes:
http://en.wikipedia.org/wiki/HD_Radio
are good examples with about 40Kbits/sec in a 9KHz bandwidth. However,
they don't use AM.


--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558