View Single Post
  #5   Report Post  
Old December 1st 08, 12:25 AM posted to rec.radio.amateur.antenna
Art Unwin Art Unwin is offline
external usenet poster
 
First recorded activity by RadioBanter: Mar 2008
Posts: 1,339
Default Reflector mesh surface

On Nov 30, 5:55*pm, wrote:
Richard Clark wrote:
On Sun, 30 Nov 2008 21:45:03 GMT, wrote:


Art Unwin wrote:
Since we are at the low sun cycle I shoose
1" hexigon poultry wire for the mash on my 3 metre dish
At what frequency will there be a noticable effect on aperture
starting with top band?
Many thanks
Art KB9MZ...,XG


The rule of thumb is things less that .1 wavelengths in size have
negligable effects, so roughly up to about 1 GHz.


Hi Jim,


You neglect to mention that a 3 meter dish would be wholly (no pun
intended) transparent to RF in the top band. *It could be solid metal
to no notice by a radiator (or receiver).


It would be like blocking the sound 3 feet from the stage at a Led
Zepplin concert with a Japanese parasol. * -Huh?-


73's
Richard Clark, KB7QHC


Yeah, I foolishly forgot the source of the question and assumed "top
band" meant highest useable frequency.

Unless I hosed the math, a 3 m dish would be a little over 10 db
isotropic at 2 m, so the combinatation would "work" from 2 m to 23 cm.

--
Jim Pennino

Remove .spam.sux to reply.


I ask the question because the radiator is a helix end fed, helix
being approx 0.3 M diameter. Intuitively, I thought that the 3 M dish
would be large enough
and thus needed a check on the perforations. Could you show how the
"combination" changed things so drastically so I may benefit from the
question?
I stated "intuitively" since the radiation is axia with respect to the
helix
Many thanks
Art