View Single Post
  #7   Report Post  
Old December 1st 08, 02:48 AM posted to rec.radio.amateur.boatanchors
[email protected] Firebottle3@gmail.com is offline
external usenet poster
 
First recorded activity by RadioBanter: Oct 2007
Posts: 41
Default Hammarlund Tube info needed

On Nov 29, 6:17*pm, "Richard Knoppow" wrote:
"AKSWL" wrote in message

...

Is there a soild state replacement for the rectifier tube
5U4 *in a
HQ-145xc?


Seems I remember such a tube being available for around
$20 from an
internet source.


73


John


* * Its easy to make a substitute using a couple of high
voltage diodes from Radio Shack and a series resistor to get
the voltage back down. I am not sure of the size of the
resistor but think around 50 ohms, someone here may have a
better value. Nearly any vacuum tube rectifier can be
replaced with this arrangement. The only disadvantage is
that the B+ is applied right away whereas with a tube
rectifier the voltage does not appear until the filiment has
warmed up a little. That gives the other filiments a chance
to come up to temperature. Not a big deal.

--

--
Richard Knoppow
Los Angeles
WB6KBL


Look he http://www.webervst.com/ccap.html

Excellent product, I've used four different versions.