On Thu, 11 Dec 2008 09:43:05 -0800, Jim Lux
wrote:
To transmit at 250 kbps on a 5 MHz bandwidth channel centered at 2.5
GHz to a receiver say 10 metres away, you only require 5.8009e-010
watts. That's the problem. This is the maximum power required. It is
far less than the -3 dBm quoted.
A question you need to ask is what's the receiver bandwidth. The
information might only be 250 kHz wide, but if the receiver is 5MHz
wide, it's seeing 13dB more noise, and it might not be able to "acquire"
the narrow band signal.
Really Jim,
Do you think the vendor would specify a bit rate capacity and then
fail to supply the needed bandwith?
Omar has a peculiar habit (much like our own home-grown trolls) of
focusing on issues that have been solved, and complaining (through the
veil of supposing "what-if") about the math behind them creating
confusion.
Part of this veil is Omar holds all the cards while revealing nothing
(another trolling technique). Simply consult:
http://focus.ti.com/docs/prod/folders/print/cc2431.html
and take any of the several links to specifications, applications,
block diagrams, schematics; and it becomes painfully obvious that any
confusion that Omar suffers, is that advice already posted in
abundance devolves to rather simpler issues than Nyquist, Shannon,
Hartley, or more exotic sources.
73's
Richard Clark, KB7QHC