Owen Duffy wrote:
More likely, 2 - 1/4 wave (with velocity factor)50 ohm coax's to a
"Tee" fitting-- Each end also to a "Tee" fitting . ( all 50 ohm coax)
(power devider)

2x50 -----------------

2X Quarter wave | "T" fitting source 50 Ohm

2x50 -----------------

IF this is clear enough-- Jim NN7K

Jerry

Ok, I understand, you the two inner conductors with a 100 ohm load
between them.

You have another pair like that from the other two arrays.

How do you connect them to the main feedline.


Owen