On Sun, 25 Jan 2009 20:46:28 -0500, "NoSPAM"
wrote:
For ultraviolet protection, a small amount of titanium dioxide may be added
(1 to 5%), but the microballoons will do a fair job alone. Painting the
finished insulators with acrylic paint (KrylonŽ) will also provide good UV
resistance.
I've never seen any white antenna insulators (except porcelain). Most
of the plastic antenna insulators I've seen are either black or
sometimes blue. I presume the filler and coloring used are something
something other than titanium white. Yet, everything made from marine
fiberglass is bright white, presumably doped with titanium white for
UV protection.
Is there any benefit to the white color over something like black
graphite stiffener and fill, which also offer UV protection? Duz the
color make any difference in preventing polymer chain breakage?
Drivel: I've noticed that the white PCV electrical tape I sometimes
use to wrap coax and connectors seems to last longer than the same
tape in black.
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com
# http://www.LearnByDestroying.com AE6KS