"Joerg" wrote in message
...
John KD5YI wrote:
"Joerg" wrote in message
...
John KD5YI wrote:
I have questions like:

* The 3586 manual says in one place that the frequency
increase/decrease buttons do not function in the remote mode. In the
chart of commands, it says that the GPIB command for increase is UP and
the GPIB command for decrease is DN. Does anyone know whether these are
valid commands or not?

* Can anyone provide a step-by-step procedure for the command sequence
to read the 3586 signal magnitude using GPIB?


No idea, but why not just try it out? In case you don't have all the
manuals they can be found here, scroll down about 40%:

http://www.w5jgv.com/amateur_radio.htm


* Which GPIB adaptor do you use?


The Prologix USB. Works fine (after finding a level threshold bug and
the designer made new firmware for it).

--
73, Joerg

Hi, Joerg -

I was using a Softmark USB-GPIB unit. Although they responded to
commands, I spent about 20 hours trying to get a reply other than
gibberish from three different instruments with no success. I may have to
roll my own controller, but first I have to understand GPIB.


That's what I had at first as well, just gibberish. Turned out the logic
threshold is way too high in the Prologix. Engaging the internal pull-ups
of the uC in there did the trick.

[...]

--
73, Joerg


I'm glad you got them to fix it because I ordered a Prologix one yesterday.
I think I should have gotten the Prologix to begin with because I need to
write my own software to do things and the Softmark was not set up for that.

73,
John